LCA
Intermittent granulator
Description
It is suitable for granulation processes after mixing various powdered materials with additives, such as desiccant, foamed ceramics and seed coating, and can achieve rapid mixing, good uniformity, fine particle size and high strength.
Features of intermittent granulator:
1. Powerful granulation: Intermittent granulation uses an external drum and an internal high-speed rotating rotor to simultaneously stir the powder in a high-speed reverse direction. Under the dual action of the flow field and liquid additives, granulation is quickly achieved. By adjusting the content of additives, stirring time and stirring frequency, the particle size distribution can be fine-tuned.
2. High granulation rate and high strength: The granulation rate of the intermittent mixing and granulating machine can reach up to 95%, with dense particles and high strength;
3. Wear-resistant and anti-corrosion: Wear-resistant and anti-sticking linings are installed on all wear parts of the equipment. This can effectively extend the service life of the high-speed motion mechanism and reduce power loss;
4. Automatic control: PLC can be used to achieve central and remote control and fully automatic operation to avoid errors caused by manual operation; users can automatically complete granulation by pre-setting the mixing, water addition, and drug addition sequence and dosage.
Applications:
It is mainly suitable for industries that require granulation and mixing, such as ceramics, tile industry, refractory materials, chemicals, food, light industry, grain and oil, slag treatment, hazardous waste and urban garbage treatment.
Technical parameters:
|
type
|
Feed moisture content
(%)
|
Feeding status
|
Effective volume
(L)
|
Production capacity (granulation)
(batches/hour)
|
Equipment power
(Kw)
|
weight
(t)
|
| EG50 | ≤3 | powder | 50 | 15-25 | 13 | 1.7 |
| EG200 | ≤3 | powder | 200 | 15-25 | 45 | 3 |
| EG500 | ≤3 | powder | 500 | 10-20 | 65 | 7 |
| EG1000 | ≤3 | powder | 1000 | 10-15 | 120 | 14 |
| EG2000 | ≤3 | powder | 2000 | 10-15 | 245 | twenty four |
Note: The above data can be determined based on factors such as different materials selected by customers and different fields.
